Bert 27 Extra strong detergent Bellinzoni

Bert 27 Extra strong detergent Bellinzoni Lt.1

How to clean rust stain on porphyry, granite, brick, concrete, stoneware? We can solve the problem by using the cleaner EXTRA LOUD Bellinzoni BERT 27. In addition, you can use for cleaning of very dirty floors to remove concrete stains, dirty rooms with fatty and oily (workshops, garages, factories) and for the decoration cleaning urban or cemetery. One of its great advantages is that it forms a layer of foam that does not drip when used on vertical surfaces, so it is especially useful for the deep cleaning of wall-tiles immediately after fixing.

CHEMICAL

• Appearance: Liquid
• Color: Transparent
• Odour: Pungent

INSTRUCTIONS FOR USE

Dilute 20-30 ml of BERT 27 in one litre of water. For particularly stubborn dirt, increase the concentration as needed. Apply the product with a mop or cloth, leave on 10 minutes and exert mechanical action with floor machine equipped with a special disc or brush, or by hand using a nylon brush, brush or mop. Rinse with plenty of water.

DIRECTIONS FOR USE

• Dilutions shown above are subject to change depending on the type and intensity of soil to be removed.
• For use in vertical use a brush to remove dirt.
• The product has an acid pH, wash utensils after use with water well.
• Before use read the recommendations printed on the label and always carry out a preliminary test.
• It is always advisable to neutralise the product after use, rinse the material treated with an alkaline solution.
• Do not use on acid-sensitive materials including polished marble.

 AREAS OF APPLICATION

Granite, concrete, stone and ceramics.

TOOLS FOR APPLICATION

Mop - Monobrush

APPROXIMATE COVERAGE PRODUCT

For the maintenance cleaning of stone materials, you can treat about 200/250 m2 per litre of product.

POSSIBLE AFTER THE

After washing, the surface can be protected using a protective or waterproofing wax with a polishing of the range.