Chiama +39 (0)881.204518
Cel +39.348 8180249 Whatsapp

Benvenuto su Ladecormarmi Shop

Bush-hammering marble on granite

Bush-hammering marble on granite

The Bush-hammering is a process that gives a finish to surfaces in stone, marble, travertine, granite and cement. The Bush-hammering makes the surface corrugated with an effect similar to orange peel. Today the bush-hammering is very popular and is required for practical and safety reasons for the anti-slip and aesthetic and for the types of finishes that can be obtained such as sandblasting, sharpening, picking, scratching. we can make the Bush-hammered stone in various coarse, medium and fine grains used for external and internal facades and for anti-slip flooring as well as for external stairways. The anti-slip is mainly required for safety. Bush-hammering is applied to reinforced concrete and prefabricated concrete panels for exposed-facing works to give an appearance to the building.

 

In the 1990s, the first rotary-Bushhammering machine was patented. The advantage is the speed of bushhammering through the rolling of the inserts in widia (mechanical bushhammering) with the possibility to choose the grain to be made, based on the number of points that are made of hard metal. medium-sized, thick or fine Bush-hammering.

Items 1 to 12 of 52 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Items 1 to 12 of 52 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5