EXTRA DROPS wet effect Ilpa

EXTRA DROPS WET EFFECT - Ilpa

EXTRA DROPS is the ideal product for the “wet look” on all antiqued materials and for finishing all outdoor floors showing up the original shade. It is applied on all natural stones (granite, marble) with an old-looking finish, flamed finish, sanded finish and on smoothed or polished surfaces according to the effect you want to obtain. It covers the minute excoriations and defects enhancing the aspect and the colours. The main result is the naturalness of the resulting polish. Moreover, with more coatings, the performance can be improved. A good waterproof effect is also provided.

APPLICATION

The product is ready to be used. Spread a coat or two by brush according to the final expected effect. Make sure the application is uniform. Allow it to dry for a few minutes, then you can trample on it. Automatic waxing machines can be used directly on the polishing lines. If used in indoor environments, ensure good ventilation during application and always wear appropriate protective equipment. It is not possible to determine the spreading rate beforehand because this strongly depends on the absorbency of the material on which it is applied and the final desired effect. However, a spreading rate of about 7/8 square meters per liter can be assured.

SAFETY RULES

Ensure work area is well-ventilated during application and until surface is dry. It is recommended the use of personal protective equipment during application. Read the safety sheet before application.

TECHNICAL DATA

• Specific weight 1440 ± 20 g/l
• Physical state liquid
• Color clear