Duralbrill Bellinzoni

Duralbrill Bellinzoni Lt.1

Duralbrill is an ideal Nanotech polishing for polish Consolidating marble flooring, terrazzo and agglomerate. Its formulation allows to improve the hardness of the material reducing the risk of damage caused by 'trampling abrasion it also gives a shiny effect to the treated material and reduces the accumulation of dirt and dust.

Technical data

• Appearance: liquid; Beige;
• PH : 9;
• Melting or freezing point: -10 ° C;
• Initial boiling point: 100 ° C;

Application

Spread the Duralbrill through the use of a cloth, a mop of a brush or a fleece. The floor to be treated must be dry and clean as well as free of dust. Spread an even coat and then let dry. After drying, polish the surface treated with a single brush.

Advice for application

The more time the product remains on the surface to be treated the better the end result. Diluted in warm water, we do not recommend the use of the pure product because it would risk creating halos on the material. Produced for internal use. It must not be applied on the outside as it does not stand up to the elements. Before use read the recommendations printed on the label and always carry out a preliminary test.

Application surfaces

As marble, granite, terrazzo, marble-resin, terrazzo, marble-cement.

Approximate Product Yield

Yield: 1 liter of product you can treat from 25 to 100 m2 depending on the absorbency of the material and the product is diluted.

maintenance
For the maintenance of the material we recommend the use of our LEM-3 detergent or Lava e lucida L & L. Once the stone has lost its brilliance advise you to repeat the treatment.