Bellinzoni Marble Wax. Bellinzoni's special preparation is a self-polishing wax that polishes marble, stone, travertine, grit and granite, eliminating surface scratches and opacity.
SOLID WAX (special self-polishing preparation for white marble, travertine and granite) BELLINZONI is a wax paste for marble with a high self-polishing power, after its application leaves a shiny gloss with a light water-repellent protective effect. The Bellinzoni solid wax during application penetrates white marble, travertine, granite, stone or agglomerates), once dried you must remove the excess by rubbing with a dry wool or cotton cloth, leave a shiny gloss without streaks and long lasting over time, preventing wear. The marble wax closes the porosity of the marble eliminates the small scratches. Format: 750 ML.
Chemical charactes:
Looks creamy
Transparent color
Characteristic smell
Specific gravity at 20 1.40 ± 0.05
Solubility in water Insoluble
Ph N.D.
Instructions for use:
The material to be treated must be clean, dry and free of dust. Apply a small amount of product (20 - 30 grams) on the surface to be polished, homogeneously distributed with a cloth or other applicator suitable for the preparation of creamy products.Leave it to dry for about 10 minutes. Then proceed with polishing. In the case of manual polishing, we recommend the use of fine steel straw (no soapy); for automatic polishing it is possible to use a low speed angle grinder (max 2000 rpm) equipped with felt disc or cloth cap. In the case of floor application, polishing is carried out with a single-brush machine with straw of steel or floor polisher with headsets for polishing or steel straw.
Tips for your application:
To facilitate the penetration of the preparation it is advisable to heat the slab to be treated; this procedure allows the opening of the porosity, penetration of the wax in depth and therefore an excellent result.
The longer the wax remains on the surface to be treated the better the final result will be.
To delay the drying of the wax it is advisable to dilute the preparation with solvent based on mineral spirit up to 20%.
In the case of floor application, pay attention to the subsequent slipping of the surface. The slipperiness will be reduced after a few day and following periodic washing, while still maintaining excellent gloss.
We do not recommend the application on synthetic materials such as plastic, linoleum and laminates.