Paste Wax to Polish marble and granite colour BLACK BELLINZONI
Bellinzoni WAX is a paste product with an exceptionally high quality protective and polishing thanks to the power of the raw materials used in its preparation The preparation penetrates into the material ( marble, granite or agglomerated stones ) and, once dried Polish it with a fine steel straw, with a felt or wool or cotton cloth dry it gives gloss without streaks and long lasting. Thanks to its raw material porosity close by eliminating small scratches
CHEMICAL CHARACTERISTICS
Looks creamy
Transparent color
Characteristic smell
Specific gravity at 20° C 1.40 ± 0.05
Solubility in water Insoluble
Ph N.D.
INSTRUCTIONS FOR USE
The material must be clean, dry and free of dust. Apply a small amount (20-30 grams) on the surface to be polished, distribute evenly with a cloth or other suitable applicator to spread creamy products. Leave dry for about 10 minutes. Then proceed to polish. In the case of manual polishing, fine steel straw is recommended (not SUDS); Automatic polishing you can use an angle grinder at low speed (maximum 2000 RPM) equipped with a disk made of felt or cloth Cap. In the case of floor mounted, single brush machine is used for polishing with straw or steel floor polisher with headphones to buff or straw.
TIPS FOR YOUR APPLICATION
To facilitate penetration of the preparation we recommend heating the slab to be treated;
This procedure allows you to open the porosity, the penetration of the wax and then an excellent result.
More time the wax remains on the surface to be treated, the better will be the result.
To retard drying wax it is advisable to dilute the mixture with white spirit based solvent up to 20%.
In the case of floor mounted to pay attention to the next surface slipperiness. The slipperiness will shrink after some day and following periodic washes, while still maintaining an excellent sharp.
We do not recommend this program to synthetic materials such as plastic, linoleumand laminate.