FREE SHIPPING
Free shipping on all US order or order above 200€
24 OURS SHIPPING!
OLD AGE is a further update of the range of the sealers and protecting agents with reviving effect. Old Age penetrates in depth also into the smaller microporosities of the materials and grants to the treated support a multiplicity of effects:
not turning yellow, stable to the atmospheric agents
water and oil repellent with development of an anti dirt barrier, but keeping unchanged the natural transpiration of the treated materials
its binding and cross-linking characteristics and the nature of the contained polymers that are fixed permanently to the treated materials
Wet, enhancing, proofing, protecting, strengthening and anti powdering effect. Permanent reviving and protection of the treated surfaces.
It develops a permanent and anti dirt protecting layer, anchored into the pores of the material, that revives and enhances the shade of the material and waterproofs and strengthens its structure. The higher reviving effect is obtained when applied to polychrome surfaces.
Clean carefully the surfaces to be treated that must be dry, absorbent and free from alien and greasy substances or friable parts.
Apply with clean cotton cloth or tampon and rub to help the penetration. Let the product work 10 to 15 minutes and then, with other clean and dry cotton cloth, always remove the eventual excess of not absorbed product before they dry on the surface in order to avoid halos and opacities impossible to remove once dried.
Never walk on the treated surface until it is completely dry (24 hours, suggested). OLD AGE is ready to use and it highly concentrated and normally it is not needed a second application. Always apply a limited quantity of product and evaluate after 24 hours if it is needed a further intensification. To enhance the effect, after the complete drying, it is possible to polish the surface buy using a single-brush machine fitted with polishing felt
30 to 60 minutes (according the environmental conditions)ESTIMATED AVERAGE
100 to 200 g/m² (according to the porosity of the material).
Packs of | Lt.1 |
---|---|
Stone type: | Apricena Stone, Granite, Limestone, Marble, Cement marble, Stones, Lavicum Stone, Serena Stone, Lapped Stones, limestone Stones, Porphyry, Quartz Resin, Sandstone, Travertine |
Finish use & care | Protective Enhancer |
Brand | General |
Packs of | Lt.1 |
Brand | General Chemicals Srl |
360 view | No |
Free shipping on all US order or order above 200€
Contact us Monday to Friday
Simply return it within 30 days for an exchange.
We ensure secure payment with PayPal, Credit card and Bank transfer