Idrostop Terrace by General is a waterproofing agent that stops water infiltration. Terrace protector for balcony and terrace floors makes them waterproof, water-repellent.
Idrostop Terrace by General is a terrace waterproofing product that stops water infiltration. It waterproofs water infiltrations caused by frost, floor settling or improper maintenance of balcony and terrace floors can cause infiltrations to the underlying structures. Idrostop terrazza waterproofs natural stone, concrete, stoneware, clinker floors, fills joints, cracks it is a liquid waterproofing agent that penetrates into the pores and does not let water through. Idrostop terrazza is made of special elastic resins that are highly resistant to water and alkalis.
Waterproofs micro-cracks and joints in balcony and terrace floors.
It effectively counteracts the infiltration of water that stagnates on the floor.
Prevents the formation of mould and efflorescence.
Prevents damage to underlying structures caused by rainwater or washing water infiltration.
Increases surface firmness by penetrating into materials.
Can be applied periodically as required.
Does not create an unsightly film, allows the surface to breathe.
METHOD OF USE
Surface preparation:
The surface must be well washed and clean, free from greasy and foreign substances of any kind and from friable parts.
Product application
Wait until the material is completely dry and proceed with the application of the product on the surface in a uniform way, using a cross application, using a clean uncolored cotton cloth or brush.
Saturate the joints of the flooring and the cracks of the material well.
Wait a few minutes for the product to penetrate the porosity and cracks of the material and then with another clean cloth, dry the surface well to remove any excess of non-absorbed product.
On very absorbent materials apply a second coat 24 hours after the first one.
The surface can be walked on 24 hours after the final application.
Estimated consumption: FROM 8 TO 15 MQ / LITER for each application and according to the degree of absorption of the material.
APPLY AT TEMPERATURES INCLUDING BETWEEN + 5 ° C and + 35 ° C