How to Remove stain and polish marble

How to Remove stain and polish marble Bellinzoni

How to remove stain and polish the marble with the Bellinzoni kit composed by Mangia Macchia (Spot Remover) and Listo Polish. With the marble renewal kit we take care of the removal of oil stains on marble, grease, coffee stains on the stones, with the Listo polishing cleansing cream to polish tops, tables, window sills and to restore marble, stone and granite.

The kit consists of:

Mangia macchia (Spot Remover)

The Pasta Mangiamacchia (Spot Remover) is an absorbent paste to remove stains on marble, granite, limestone, slate, terracotta, stoneware and ceramic. It eliminates most stains or oil stains, industrial grease, food fats, coffee etc. ... Its chemical composition allows the absorption of particularly resistant stains in depth. New water based formulation.

DIRECTIONS FOR USE

• Before applying the product mix the dough into the jar to mix the components.
• The dough should adhere well to the substrate to improve its effectiveness. In the removal of oil stains, make sure that the dough is properly applied when it tends to not adhere well.
• In the case that, after the first application, the stain is not completely disappeared, proceed to subsequent applications.
• In case of application with particularly high temperatures, very dry climate or the presence of air conditioning recommend to cover the dough with a plastic film for about 2 hours; this arrangement will keep the wet paste. Subsequently, remove the plastic film and wait for the natural drying of the product.
• Once the treatment with the product, you should wash with LEM-3 detergent to clean any residue.
• Before use read the recommendations printed on the label and always carry out a preliminary test.

AREAS OF APPLICATION

Marble, granite, brick, porphyry, concrete, slate, marble-resin, terrazzo, concrete, ceramic and porcelain tiles.

TOOLS FOR APPLICATION

Spatula - Brush

Listo Kit - Clear And Glossy Bellinzoni

The kit renews marble- granite Bellinzoni LISTO is a creamy and ecological product to clean and brighten the natural color of the stones, marble, granite, onyx and marble composite with a single application. The surfaces where you can use "LISTO" are tables, window sills, fireplaces, kitchen tops, shelves of baths, walls, the monuments and any polishable surface. The kit consists of: - JAR OF 250 gr LISTO - SPONGE APPLICATOR - TWO POLISH CLOTH

Chemical characterization

• Appearance Cream
• Color Straw yellow O
• dore Perfume characteristic
• Specific gravity at 20 ° C 1.02 ± 0.05
• Solubility in water Soluble in any ratio
• pH 8.2 ± 0.02

Instructions for Use

The surface to be treated must be clean, dry and free of dust. Withdraw from the jar the quantity of LISTO necessary to the processing of the part to be polished using the special sponge; apply the product in a rotary sense on the surface so as to cover it entirely. LISTO Allow to dry for about 10-15 minutes and then proceed to the polishing with the polishing cloths contained in the kit.

Advice for application

• We recommend to periodically repeat the maintenance treatment to maintain the gloss of the material.
• Before use read the recommendations printed on the label and always carry out a preliminary test.

Application Surfaces

Marble, granite, terrazzo, marble-resin, marble-cement, limestone.

Approximate Coverage

With the amount of LISTO contained in a package you can be treated and maintain approximately 10-20 m2.