Idea Quarzo Bellinzoni

Idea Quarzo by Bellinzoni

Idea quartz by Bellinzoni is a reviving, hydro and oil repellent binding agent that intensifies the color of engineering stone, quartz-resin such as Okite, Silestone, Santa Margherita. Certified for contact with food. Protects against the penetration of water, oil, grease and humidity.

APPLICATION

Surface preparation:

The surface must be dry and clean; possibly stains, mildew, crusting must be
removed, otherwise their subsequent removal would be difficult.

Application:

Brush, roller, mop, fleece. It is recommended, where possible, brush application as it allows better penetration protection. To use, apply IDEA QUARTZ with a brush, pressing lightly to make it penetrate well into the cracks, corners and cavities. It is also possible to apply the protective using a dispenser to spray at low pressure, at a distance of 20-25 cm from the surface and taking care to dab any sagging. Allow the product to air and the material will be protected. If after the application there were any surplus, remove them by rubbing with a rag soaked in the product and in order dab with a dry cloth. During the application and subsequent drying, the temperature of the substrate should be between 10 and 30 ° C. In case of application of the floor with underfloor heating, turn off the heater and let the stone cool completely.

DIRECTIONS FOR USE

• It is advisable to apply the product until complete saturation of the stone.
• On highly absorbent material it is recommended to apply the product 2 times in 2 hours after the first application.
• Do not dilute the product with other solvents or water as the preparation is ready for use.
• The material to be treated must be completely dry.
• Another application system, suitable for small pieces, may be the one for immersion; you can also use a sponge with product and dab the material.
• Once treated, the stone material must be allowed to dry for 24 hours to complete polymerization occurs.
• In the case of treatment of statues, vases or decorative items outside, pay close attention to the gaps.
• Before use read the recommendations printed on the label and always carry out a preliminary test.

AREAS OF APPLICATION

Quartz- Resin