Drai Anti stain for marble and granite Lt.1 - Ilpa

DRAI's remarkable water repellency prevents water from penetrating the capillaries of building materials by preventing the formation of algae and molds, and also pollutants, chemicals or dirt can not be deposited and therefore the surfaces do not degrade and do not get dirty. It can be used on floors, tables, worktops, bath tops and kitchens and coatings on which it avoids the absorption of liquids such as water, oil, coffee and wine. It does not form film, penetrates deep into any type of stone and lithido material. It does not yellow and does not alter the color of the treated material, allowing it to permeate it.

Drai once dried is invisible and the natural appearance of the materials remains totally unaltered
Drai is permeable to steam; The breathability of the various treated surfaces remains practically unchanged.
Drai is chemically stable and does not alter as a result of exposure to U.V. rays.

TECHNICAL DATA

Specific weight (MI 001): 800 ± 20 g / l
Physical state: liquid
Color: colorless

APPLICATION

Prior to application, it is recommended to clean the surfaces by removing soluble salts, molds or friable parts. Application must be done on dry, cold and unattended surfaces; Low pressure, brush or roller airless airplanes may be used. In any case, care should be taken that the application is uniform until the total impregnation of the support. The optimal amount should be determined by making a preliminary test on a small area. Indicatively, with a liter of Drai you can treat 10/15 square meters on medium porosity materials. Apply Drai, in two crossed hands, with cotton cloth, to the material thoroughly cleaned by dirt, grease or wax, and completely dry. Spread a uniform coat over the entire surface and let it dry for at least 6 hours to allow full absorption of the product. For very porous surfaces (such as terracotta, travertine, cement, etc.) more applications are required.