KRISTALL T Crystallizer Professional Tenax

KRISTALL - T Crystallizer Professional Lt.1 - Tenax

MARBLE Kristall- T is the new professional crystallizer for marble and stones. Restores the natural lustre of worn surfaces and is ideal for limestone floors such as marble, travertine and agglomerate as grit and Palladian. Indicated for treatment professionals, Kristall- T allows you to recover the lost lustre, easily and fast. The treatment makes the surface resistant to wear and to daily traffic. Product High efficiency and long life.

Instructions for Use

Ready to use. Shake before use and use in a sprayer. To get a good result you need to clean the floor thoroughly. Remove any impurities and residues of previous treatments. A clean dry surface spraying Kristall- T in small quantities on a maximum area of 2 meters square. Immediately after switching with a mono brush (weight 45-50 kg) at low speed (150-170 rpm), fitted with a steel wool pad and distributing the product on the surface. Proceed in the operation, increasing the number of revolutions (maximum 400rpm), to obtain the glossy surface. After dry polishing with mono brush equipped with soft white disk microfiber or white felt. You can make a stain resistant treatment after about 12 hours, to make the protected surface.

Technical data

• DENSITY at 25 ° C g / cm3: 1.1
  YIELD: about 40-60 square meters with 1 kilo of product pH: 2-3
  APPEARANCE: pink liquid
  STABILITY 'IN STOCK: 2 years, at temperatures between 15-30 ° C