Chiama +39 (0)881.20.45.18
Cel +39.3488180249 Whatsapp

Benvenuto su Ladecormarmi Shop

Processing Stones

Processing Stones

Marble processing

The main processing techniques of the marble surfaces are:

  • Grinding - Sanding : for polishing of the finished products and the slabs are used polishers with the stationary machine, bridge and tape or by means of abrasive silicon carbide or resinoids to use with angle grinders.
  • Hammering : it is a technique used to impart to the sheet an aspect of sculptured surface, and then simply not polished, smoothed. The machines for this type of operation use a roller plane for the sliding of the material to be machined and a jackhammer provided at its end of tools of hard material which are designed to sculpt the surface.
  • Brushing, antique marble : is a technique that serves to impart to the sheet surface a worn appearance (this is also called antiquisation). The processing is performed by the use of abrasive brushes applied to machines for sanding, grinding or sanding. The brushes are to have a greater impact where the material shows concentrations softer and then you get an uneven surface but lucid. This technique is gradually becoming more widespread.
  • Tools for sculpting marble and granite: The stone and marble are processed using either compressed air or by hand using widiam pointed chisel, widiam chisels, widiam chisels grafted teeth, carbide bush hammers, which enable, bushhammer or scratch the material.
  • Diamond tools: Diamond blade - diamond wheels allow us to cut and profile the traditional stone materials and new materials such as stoneware, bretonstone, laminam, lapitec, synthetic marble.
  • So Items for marble ranging from diamond discs, diamond wheels, diamond cutters abrasives magnesium or synthetic, resin and diamond to the canvas in silicon carbide.

Items 1 to 12 of 248 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Items 1 to 12 of 248 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5