Lupato TANGA C Coast plate for bush hammering

Lupato TANGA C Coast plate for bush hammering

Lupato Tanga C costa is a bush-hammering plate designed to be used with rib and bullnose polishing machines to bush-hammer the flat and bullnose. With the Costa 3/1W20 and Costa 4/1W 20 plate from Lupato meccanica we can bush-hammer medium and fine grain non-slip, as well as the bush-hammering of edges with flat rib using the rib polishing machine. With the Costa 2 bullnose bush-hammering plate on marble, stone and granite with the edge polishing machine.

Configuration:

Costa 2 Bullnose

• Tool diameter: 130 mm.
• Rollers: 2
• Drill bits per roller: 24
• Finish: Fine bush-hammering.
• Material: Marble, Stone, Travertine, Granite, Sandstone.
• Weight: 3 Kg. 

Costa 3/1W20

• Tool diameter: 110 mm.
• Rollers: 3
• Tips per roller: 20
• Finish: Anti-slip on the plane adjustable from 3 to 10 cm., flat edge with edge polish. 
• Material: Marble, Stone, Travertine, Granite.
• Weight: 2,2 Kg.  

Costa 4/1W20

• Tool diameter: 150 mm.
• Rollers: 4
• Tips per roller: 20
• Finishing: Anti-slip on top adjustable from 5 to 13 cm., flat edge with edge polish.
• Weight: 3 Kg.

Parameters of use:

• Rotational speed: 2,000 rpm max.