Mastic Tenax Vigor White

Mastic polyepoxy Tenax Vigor White ml.750

Polyepoxy mastic to glue,fill marble, granite and engineered stone. Very quick, very soft, very good colour, excellent spreadability does not lose verticality after mixing with the catalyst. The VIGOR is characterised by having excellent adhesion in very short time, 45-60 min. The hardened product is presented in a very smooth surface, bright and well polished.

Instructions for Use

Before applying the product be sure that the material is clean, dry and free of dust. Take the container / jar / tin putty the required amount of putty you will have to use, add 2-3% of paste hardener, mix energetically and use. Never to return in the mastic container mixed with the catalyst that has not been used. If it is necessary to correct the colour of putty, use the colouring paste or metal oxides. The colour must be added before the catalyst. Add the required amount to obtain the desired colour, and then add the catalyst to obtain the hardening. An excess of colouring paste or powder pigments may influence the final characteristic of the glue.

TECHNICAL DATA

• Viscosity cps 25 ° C 20 r.p.m ASTM D2196) thixotropic paste
  Density at 25 ° C g / cm³ 1.1
  White color
  Mastic use money + hardener 100 + 2/3
  Working time recommended at 25 ° C for about 45-60 min min
  Adhesion strength in MPa at 25 ° C on marble botticino after 2 hours ASTM D 4541: 7.9
  Bond strength in MPa at 25 ° C on marble botticino after 24 hours ASTM D 4541: 8.1
  Adhesion strength in MPa at 25 ° C after 2 hours of granite ASTM D 4541: 5.1
  Adhesion strength in MPa at 25 ° C of granite after 24 hours ASTM D 4541: 5.3