Epoxy mastic Domo 10 A+B extra strong Tenax

Epoxy mastic Domo 10 (A + B) extra strong - Tenax

Epoxy mastic Domo 10 (A + B) extra strong. The two-component epoxy putty or epoxy resin Domo 10, consisting of part A + B, guarantees us a bonding with a force of adhesion with characteristics of mechanical strength and resistance on the outside of all respect. The two-component epoxy or epoxy mastic also gives an excellent seal of marble, stone, granite and ceramics. Moreover, thanks to its extra strong epoxy system is also suggested to make mixed bonding type:

• Metal-stone;
• ceramic-stone;
• stone-glass;
• concrete-stones;
• concrete-glass;
• cement-metal;
• stone composite panels;
• stone-wood or laminated wood panels.

Under normal use and work conditions, the product well preserved between 18-25 ° C away from heat, moisture and direct sunlight is guaranteed for 2 years. Warning: The Glue and catalyst are chemical products. Before use, please read the safety data sheets and safety instructions on the tins / drums.

Technical data

• Viscosity Part A cps 25 ° C: thixotropic paste
• Part B Viscosity cps 25 ° C: thixotropic paste
• Appearance Part A: beige paste / Part B Appearance: beige paste
• mix ratio by weight or volume: 100 + 100 = 200 tot
• of mass Gel time 25 ° C: about 50-60 min.
• of touch dry time at 25 ° C with 50% relative humidity: about 2h30

Application

The resin and hardener should be stored in the original containers. In automatic dosing systems, it should be avoided contact with metal parts of brass and similar alloys copper that can rust. Use plastic resistant to corrosive liquids, never use PVC. Take the two quantities containers necessary WEIGHT OR VOLUME, the two components A and B in the ratio 1: 1. Mix energetically and use. While mixing, use clean tools. If necessary, add colours and pigments. Make sure that the material on which it will be applied the glue is completely dry and clean. In the case of automatic dispensers, we recommend checking daily dose. For cleaning of equipment use non-fat solvents, such as acetone and butyl acetate. Always use protective gloves and goggles during use (read the safety data sheet). Tightly close the container after use, avoid prolonged contact with the air.