Abrasives for marble sanding

Abrasives for smoothing and polishing marble such as white marble, black marble, Botticino, limestone, stone, travertine, onyx, terrazzo. We are able to offer a line of technologically advanced abrasives produced in Italy in order to satisfy the most varied needs for restoring and polishing marble, Palladian, terrace and natural stones. The abrasives for marble are used to carry out the roughing, smoothing and polishing of slabs, marble strips or to polish the floors in place or for the maintenance and care of marble. With the sequential use of the abrasive grains we reduce the roughness of the marble and consequently we obtain a high level of natural gloss. The available abrasive grits start from a coarser grit such as Gr. 30 for roughing, to arrive in sequence to a finer grit which is equivalent to Gr. 3500. The wheels for polishing marble can have different shapes in order to be used on different types of manual or automatic machines such as plates, plateaux, frankfurt verona, flat edge, bullnose edge, cassani segments or Genovese comma. The composition of the abrasives can be of magnesite, synthetic, sintex, resin bonded diamond or the diamond pad micro polishing for the restoration of floors. There are different types of polishing abrasives for marble, polishing powders, frankfurt 5 extra polishing sectors and 5 extra plates, to polish marble of different hardness, in order to obtain a mirror polishing of the marble for every need and, for every type of material more or less hard or of different morphological composition