Sintolit Semisolid Straw Mastic

SINTOLIT SEMISOLID STRAW MASTIC

The Sintolit semisolid straw mastic rapid hardening to glue, caulk slabs or dispel marble, stone, granite. The Sintolit also used in DIY for small restoration work, paste colored with oxides or pigments. Supplied with a catalyst paste.            

TECHNICAL DATA

• Appearance: viscous liquid;
• Available colours: white, pale and black;
• Mixing ratio: 100: 3 by volume (= 3%);
• processing time (pot life): 3 minutes;
• Full cure time: 30 minutes;

How to use:

Before applying the grout for marble on the surface to be repaired, it must be carefully cleaned of soil or dust. The surface must be well dry to allow the mastic to easily adhere to the parts that need to be glued or grouted. The use of protective gloves is recommended. Take the amount of mastic needed from the can, add 2/3% of the hardener in paste, mix well with a spatula, spread the mastic on the parts to be glued or stuccoed and wait for about 7/8 minutes the putty dries. Drying is complete when fingerprinting does not remain on the stucco with a fingertip. The drying speed also depends on the outside temperature. At this point, the material is ready to be sanded, smoothed and polished with marble abrasives. The tools can be cleaned with ethyl alcohol, pure acetone or nitro thinner.

Advantages:

The advantages of the stucco for marble are in its hold, in the possibility of working it with the abrasives used for marble, its ability to perfectly glue many types of marble and natural stone