Chiama +39 (0)881.204518
Cel +39.348 8180249 Whatsapp

Benvenuto su Ladecormarmi Shop

Processing Stones

Processing Stones

Marble processing

The main phases of marble processing are:

Roughing - Polishing:

The polishing of slabs or strips in marble, stone, travertine is carried out with in-line polishing machines or with the manettone, using frankfurt or magnesite, synthetic abrasive, protos abrasives, resinoids and with extra 5 polishing.

Bush-hammering:

It is a finish that gives the stone or marble slab a rough and non-slip surface. The tools used to make bushhammering are in widia, hard metal, very resistant to bush hammer vibrations. By hand, bush hammering can be carried out using Cuturi's pneumatic hammers using bush-hammers.

Brushing, antiquing:

It is a finish that creates a worn, aged appearance on the marble or stone slab (this is also called antiquing). The processing is carried out with the use of abrasive brushes of silicon carbide or diamond applied to polishing machines or with electric polishers. The antique brushes are able to dig more where the marble is softer, thus obtaining an irregularly excavated surface. The antique finish is brushed is always more in demand in the modern furnishing.

Tools for sculpting marble and stone:

The sculpture of stone and marble is made with the help of compressed air or by hand with the swirls, chisels, grades, bocciarde in widia for sculpting, engraving, bush-hammering stone and marble.

Diamond tools:

The cut of the marble and the granite is achieved with the Diamond disc - to shape, to profile the granite the diamond wheels to design allow us to profile both traditional stone materials and new materials such as stoneware, bretonstone, laminam, lapitec, synthetic marbles .


The Articles for marble works range from diamond discs, diamond wheels, diamond cutters, magnesite abrasives, sintex abrasives, resin resinoids and diamond silicon carbide.

  • Grinding - Sanding : for polishing of the finished products and the slabs are used polishers with the stationary machine, bridge and tape or by means of abrasive silicon carbide or resinoids to use with angle grinders.
  • Hammering : it is a technique used to impart to the sheet an aspect of sculptured surface, and then simply not polished, smoothed. The machines for this type of operation use a roller plane for the sliding of the material to be machined and a jackhammer provided at its end of tools of hard material which are designed to sculpt the surface.
  • Brushing, antique marble : is a technique that serves to impart to the sheet surface a worn appearance (this is also called antiquisation). The processing is performed by the use of abrasive brushes applied to machines for sanding, grinding or sanding. The brushes are to have a greater impact where the material shows concentrations softer and then you get an uneven surface but lucid. This technique is gradually becoming more widespread.
  • Tools for sculpting marble and granite: The stone and marble are processed using either compressed air or by hand using widiam pointed chisel, widiam chisels, widiam chisels grafted teeth, carbide bush hammers, which enable, bushhammer or scratch the material.
  • Diamond tools: Diamond blade - diamond wheels allow us to cut and profile the traditional stone materials and new materials such as stoneware, bretonstone, laminam, lapitec, synthetic marble.
  • So Items for marble ranging from diamond discs, diamond wheels, diamond cutters abrasives magnesium or synthetic, resin and diamond to the canvas in silicon carbide.

Items 1 to 12 of 282 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Items 1 to 12 of 282 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5