Wax Stripper water based Tenax

Wax Stripper water based Tenax

Water-based Wax Stripper Tenax wax remover to remove layers of waxes that have built up, deposited over time on the floor. Water-based wax stripper to remove both natural and synthetic waxes with ease without affecting the natural shine of granite, marble and stone floors.

Instructions for Use:

Dilute the Wax stripper in warm water in a ratio of 1:10 to 1: 5. Distribute the solution on the surface with a mocho or cloth after about 5 minutes intervene with a mono-brush and abrasive disc, until the wax layers are removed. Finally vacuum with suitable liquid vacuum cleaners. Rinse and aspirate again. It is possible to use a higher concentration for de-waxing in the most difficult to de-wax points. It is good to evaluate its effect on a sample or on a hidden corner before proceeding with the application.
Warning: it is an alkaline detergent that could ruin some plastic materials, such as methacrylate, linoleum and non-alkali-resistant surfaces, such as many delicate and onyx marbles.

Applicable surfaces:

• PVC
• RUBBER
• GRANITE
• MARBLE
• CERAMIC
• CONCRETE AGGLOMERATE
• CONCRETE
• PORCELAIN STONEWARE
• TERRACOTTA