Counterpro Tenax is a stain-resistant protector for the protection of kitchen countertops made of marble, granite, and quartzite. It protects against liquid substances and facilitates the daily maintenance of marble surfaces.
Stain protective Counterpro by Tenax is a stain-resistant product that protects countertops made of marble, granite, limestone, quartzite, sandstone, and terracotta. It is recommended for safeguarding kitchen countertops, quartzite, marble, and granite work surfaces. Counterpro is also approved for food contact, making daily cleaning of kitchen countertops and marble surfaces easier. The stain-resistant protector Counterpro seals the micro-pores of the treated surface, preventing liquid absorption.
Technical data:
Appearance: Opalescent liquid.
Standard colour: Colourless
Yield: One litre treats on average Marble and granite 30 square metres - Limestone and sandstone 20-25 square metres.
How to apply:
The surface must be dry and clean. The presence of water or dust can make the treatment uneven.
The product can be applied by brush, spray, cloth or sponge: apply evenly the amount that the material naturally absorbs. Applying in excess creates a surface film.
Poorly absorbent surfaces: one minute after application, remove excess product from the surface with a clean cloth. For best results, repeat the treatment approximately 10-15 minutes after the first application.
Highly absorbent materials (e.g. Quartzite): two hours after application, remove any excess product from the surface with a cloth soaked in a little product. Anti-stain treatment is achieved 24 hours after treatment. In the case of floors, wait 24 hours before walking on the surface.