FREE SHIPPING
Free shipping on all US order or order above 200€
24 OURS SHIPPING!
Bi-component epoxy glue with zero yellowing to glue Lapitec. Epoxy mastic paste without solvents with a strong resistance suitable for both indoor and outdoor use, excellent transparency does not leave streaks even at 0 ° C. Once hardened, Tenax Strongbond A + B always remains dry and shiny even in bad conditions such as humidity and temperature.
Resin and hardener must be stored in their original containers.
The hardener must be kept tightly closed, the air hardens it.
Avoid contact with other resins and hardeners, even hardened ones, which can alter the properties of the product.
Withdraw the necessary WEIGHT quantities of the two components from the two containers with respect to the use ratio
Mix vigorously and proceed with use.
When mixing, use clean plastic or glass tools.
The use of non-stainless steel metal parts can damage the quality of the resin.
Make sure that the material on which the Strongbond resin will be applied is completely dry and clean.
Technical data:
Resin viscosity cps 25 ° C 20 r.p.m ASTM D2196: Thixotropic paste
Hardening viscosity cps 25 ° C 20 r.p.m ASTM D2196: 800-1000 cps
Resin / hardener density at 25 ° C gr / cm³: 1.0 / 1.0
Resin / hardener aspect: Transparent Liquids
Aspect hard resin Transparent: Ice
Color of the resin in GARDNER ASTM D1544: Max. 0.5
Color of the hardener in GARDNER ASTM D1544: Max. 0.5
Mixing ratio by weight: 100 + 70 = tot 170
Gel time in mass 25 ° C (100gr + hardener): About 20-25 min
Touch dry time at 25 ° C with 50% relative humidity: 1h15min
Touch dry time at 40 ° C with 10% relative humidity: 1h10min
ShoreD hardness (1) ASTM D 2240: 75-77
Glass transition temperature Tglass (ASTM E1545) (1): N.D.
Adhesion force on glass (ASTM D4541) (1): 6 Mpa
Aging test in Qsun climatic cell (ASTM D904) 3 years outdoors (light + rain + thermal shock): pass the test, no detachment of the resin from the substrate
Solar yellowing with Xenon test 15 years (ISO11341): absent
Minimum reaction temperature: 1 ° C
Minimum use temperature after hardening: -25 ° C
Maximum temperature of use after hardening: + 60 ° C
Workability time at 25 ° C (minimum time for polishing and cutting): 24 hours
Packs of | Kg.2 |
---|---|
Brand | Tenax |
Packs of | Kg.2 |
Brand | Tenax |
360 view | No |
Free shipping on all US order or order above 200€
Contact us Monday to Friday
Simply return it within 30 days for an exchange.
We ensure secure payment with PayPal, Credit card and Bank transfer