Water Ager Revive Hydro oil water repellent wet effect Tenax

WATER AGER REVIVE - HYDRO-OIL WATER REPELLANT WET EFFECT  LT.1 - TENAX

WATER AGER Water-repellent hydro-moisturizing hydro-water is recommended for rough, sandblasted, brushed, flamed or polished surfaces. The product gives excellent moisture-repellent properties to the treated surfaces and does not yellowish the sun with UV rays. Water Ager penetrates and stays in the microporousness of the material by causing its permanent wet effect.

Technical data

• Density at 25 ° C gr / cm3: 0.95
• Appearance: opalescent liquid
• Standard color: colorless
• CONSUMPTION: One liter is about 20-30 square meters of material. Consumption depends heavily on the porosity of the material.

Instructions for use

The product must be applied on completely dry and clean surfaces. The presence of water or dust may render the treatment homogeneous. The product can be applied by brush, spraying, cloth or preferably with a sponge, taking care to apply the amount of material the material absorbs naturally. After a few seconds of application, remove excess WATER AGER from the surface with a clean cloth to avoid sticky surface film formation. For a good result repeat the treatment after about 10-15 minutes from the first application. The desired stain effect is reached 24 hours after treatment. In the case of floors, wait 24 hours before walking on the surface. IMPORTANT: When a surface is treated for the first time, it is best to evaluate the effect on a sample or a hidden angle. Close the container after use.