Yellow polishing powder 5 Extra for marble and grit

Yellow polishing powder (5 Extra) for marble and grit 2 kg

Extra polishing powder 5 for natural polishing after sanding marble, stone, travertine, palladium and grit floors. The extra yellow 5 powder polish is used wet and gives a natural shine to marble, stone surfaces without creating films. The extra 5 polishing powder gives marble, stone and grits the natural gloss and makes surfaces not very permeable to water and dirt, making cleaning easier.

FEATURES AND USE:

Yellow Polishing powder for all types of marble, Palladian, stone, grits and travertine,concrete floor..

INSTRUCTIONS FOR USE:

• Smooth the surface of marble or grit to the 400 grit or 800 and carefully clean the floor with neutral detergents (Bellinzoni Lem 3 - Tenax Bravo Cleanser - Bellinzoni Ultra stripper).
• Pour 30-50 grams of polishing powder on the surface Yellow, place the white disk of the single brush the dust and wet with a sprayer to water in the area close to the disk until a creamy consistency of the powder.
• Continue working on 1-2 square meters at a time for a few minutes, adding water to always maintain this creamy powder.
• DO NOT allow to dry the dough on the surface!
• After finishing the polishing process, dilute the creamy residue with water and remove with aspirates.
• If the desired degree of gloss is obtained, always clean it with neutral detergents, otherwise repeat the operation.

YIELD:

1 kg / 30-40 m².

PACKAGING:

2 Kg.